|
|
Products
ULTRA MAGNETIC V BLOCKS |
|
ULTRA MAGNETIC V BLOCKS
Used for Grinding, Light Milling, Drilling& Inspection of Round & Square Jobs.
Accuracy for Flatness, Squareness and
Parallelism within 0.005mm upto 6”L &
0.010mm for 8” L of"V"block
The Bigger V angle &bottom holding
surface are equipped with hardened
strips for wear resistance.
Uniform and strong magnetic pull to all
three magnetic surfaces Top, Bottom &
V face.
Hardness of V face is 60±2 Rc.
Powder Coated.
Easy ON- OFF facility.
120o " V " angle also available. |
Sr.No. |
Cat No. |
Size |
Range (mm) |
Pull |
1 |
UL-10101 Soft |
40L X 40W X 50H [2"] |
Ø 3 - Ø 25 |
25 Kg |
2 |
UL-10101 Hard |
40L X 40W X 50H [2"] |
Ø 3 - Ø 25 |
25 Kg |
3 |
UL-10102 Soft |
75L X 56W X 75H [3"] |
Ø 5 - Ø 40 |
75 Kg |
4 |
UL-10102 Hard |
75L X 56W X 75H [3"] |
Ø 5 - Ø 40 |
75 Kg |
5 |
UL-10103 Soft |
100L X 70W X 95H [4"] |
Ø 5 - Ø 65 |
100 Kg |
6 |
UL-10103 Hard |
100L X 70W X 95H [4"] |
Ø 5 - Ø 65 |
125 Kg |
7 |
UL-10104 Soft |
150L X 75W X 100H [6"] |
Ø 5 - Ø 70 |
125 Kg |
8 |
UL-10104 Hard |
150L X 75W X 100H [6"] |
Ø 5 - Ø 70 |
150 Kg |
9 |
UL-10105 Soft |
200L X 125W X I50H [8"] |
Ø 10 - Ø 140 |
175 Kg |
10 |
UL-10105 Hard |
200L X 125W X I50H [8"] |
Ø 10 - Ø 140 |
175 Kg |
|
---------------------------------------------------------------------------------------------------------------------------------------------------- |
|
ULTRA HARDENED & GROUND MAGNETEC V BLOCKS
All sides are hardened & ground
Used for grinding, light Miliing, Drilling& inspection of round & square Jobs.
Accuracy for Flatness, squareness &
parallelism within 0.005mm upto 150L& 0.010mm for 200L
Hardness upto 60 RC.
Supplied in matched pair.
Uniform and Strong magnetic pull to all
three magnetic surfaces, Top, Bottom& V Faces.
Easy ON - OFF facility. 120° "V" angle
also available.
|
Sr.No. |
Cat No. |
Size |
Range (mm) |
Pull |
1 |
UL-32001 Hard |
40L X 40W X 50H [2"] |
Ø 3 - Ø 25 |
25 Kg |
2 |
UL-32002 Hard |
75L X 56W X 75H [3"] |
Ø 5 - Ø 40 |
75 Kg |
3 |
UL-32003 Hard |
100L X 70W X 95H [4"] |
Ø 5 - Ø 65 |
100 Kg |
4 |
UL-32004 Hard |
150L X 75W X 100H [6"] |
Ø 5 - Ø 70 |
120 Kg |
5 |
UL-32005 Hard |
200L X 125W X I50H [8"] |
Ø 10 - Ø 140 |
175 Kg |
|
---------------------------------------------------------------------------------------------------------------------------------------------------- |
|
ULTRA HARDENED & GROUND V BLOCKS
Used for supporting of round and
square jobs during Light
machining, Grinding, Drilling &
Inspection.
Accuracy for Flatness, Squareness and
Parallelism within±0.003mm.
Hardness 60±2 Rc.
Supplied in perfect matched pair.
Supplied with clamp.
Can also be used for end face, side
face and right angle Grinding
|
Sr.No. |
Cat No. |
Size |
Range (mm) |
1 |
UL-10201 |
25L X 20W X 20H [1"] |
Ø 3 - Ø 20 |
2 |
UL-10202 |
50L X 20W X 20H [1"] |
Ø 5 - Ø 30 |
3 |
UL-10203 |
80L X 20W X 20H [1"] |
Ø 6 - Ø 50 |
4 |
UL-10204 |
100L X 20W X 20H [1"] |
Ø 6 - Ø 70 |
|
|
| Inside Dial Calipers | Gauge Blocks / Slip Gauges | Surface & Angle Plates |
| Testing Instruments | Magnetic & Nonmagnetic V Blocks | Torque Wrenches | Pistol Calipers | |
|
|
|