KCP Gauge Blocks / Slip Gauges, Length Bars, Gauge Block Accessories, Angle Gauges, Mumbai, India


Products

KCP Gauge Blocks / Slip Gauges

Gauge Blocks

Gauge Blocks

• Our KCP class Gauge blocks are made from special grade of Tungsten Carbide / Alloy Steel / Ceramic that gives greater wear resistance, superior finish leading to strong wringability.
• Wear Protector and Gauge blocks required for calibration of Micrometer checker are also offered.
• Along with the standard sizes,Gauge Blocks are also made available in customized sizes. Individual Gauge Block is also available.
Type Of Metric Sets No. of Gauge Block Type of Imperial Sets No. of Gauge Block
M122/1 122 Nos. E 81 81 Nos.
M112/1 112 Nos. E 41 41 Nos.
M103/1 103 Nos. E 36 36 Nos.
M88/1 88 Nos. E 9 9 Nos.
M47/1 47 Nos. E 2 2 Nos.
M46/1 46 Nos.    
M32/1 32 Nos.    
M9/1 9 Nos.    
M2/1 2 Nos.    
M2/2 2 Nos.    
* All Sets from Metric are also offered in 2 mm base size
All our Length Standard products nd accessories are delivered in quality wooden casing, appended with; Callibration Certificate traceable to National Standards and Instruction Manual on the use and care.
----------------------------------------------------------------------------------------------------------------------------------------------------
Long Series Gauge Block

Long Series Gauge Block

• Range available over 100mm to 500 mm in Grade K, Grade 0, Grade 1 & Grade 2 as per ISO 3650/Din 861 Standards.
• Manufactured from special grade of alloy steel, for greater wear resistance and superior surface finish.
• Holes are provided at both ends of Gauge Blocks for combinations with help of Gauge block clamp.
• gauge blocks are available in standards as well as customized sizes. Along with standard sets, individual Gauge Block is also available.
Type of Set Sizes in mm Qty.
M8 125, 150, 175, 200, 250, 300, 400 & 500 8Nos.
----------------------------------------------------------------------------------------------------------------------------------------------------
Length Bars

Length Bars

• Range available from 100 to 500mm in 'Reference Grade','Callibration Grade', 'Inspection Grade' and 'workshop Grade' as per IS: 7014 standard.
• also available in Grade K, Grade 0, Grade 1 & Grade 2 in line with ISO: 3650/DIN 861 standards.
• Bars are offered in 22mm and 12mm diameter from range 25 to 500mm in steps of 25mm. Bars of 12mm dia. can be used as Micrometer setting standards.
• Manufactured from same special alloy steel used for Gauge Blocks so as to achieve the finest properties.
• 'Calibraton Grade', 'Inspection Grade' and 'Workshop Grade' are provided with internal threaded holes to both the ends for combinations with help of studs.
• 'Reference Grade' length bars are used as a master with plain ends for highest accuracy.
----------------------------------------------------------------------------------------------------------------------------------------------------
Gauge Block Accessories
Gauge Block Accessories
• These accessories are designed to extend the applications of Gauge Blocks in production & inspection.
• In line with IS:4440 standards
• Enables quick and easy assembly of equipments or Gauges and saves repetitive expenditure on gauges.

• Ideal for -
      > Setting of internal & external measurement of gauges.
      > Setting of Bore Gauges
      > Height Marketing
      > Accurate Graduation etc.

• All wearable parts are made of carbide.
Description 7 Pcs. set 16 Pcs. set
Base (Steel) 01 01
Tungsten Carbide Scriber 01 01
Tungsten Carbide Tipped Centre Point - 01
Tungsten Carbide Large Measuring Jaw 02 02
Tungsten Carbide Parallel Measuring Jaw - 01
Tungsten Carbide '2.5 mm' Radius Jaw - 02
Tungsten Carbide '5 mm' Radius Jaw - 02
Tungsten Carbide '6 mm' Radius Jaw - 02
Holder (Steel) '0-50 mm' 01 01
Holder (Steel) '50-100 mm' 01 01
Holder (Steel) '100-200 mm' 01 01
Holder (Steel) '200-300 mm' - 01
----------------------------------------------------------------------------------------------------------------------------------------------------
Angle Gauges
Angle Gauges
• Angle gauges are used for inspection and calibration of angles, tapers, indexing plates, rotary scale/table, dividing head, Clinometers etc.
• Manufactured as per IS: 6231 of 1971.
• Offered in Standard and Non standard angles. Special angles as per requirement are also provided.
• Available in set as well as individual angles.
Type of Set Sizes
Set A (13 Pieces Set) 1, 3, 9, 27, & 41 Degrees (01 No. each)
1, 3, 9, & 27 Minutes ( 01 No. each)
6, 18 & 30 Seconds ( 01 No. each)
Precision Square Block ( 01 No. )
Set B (15 Pieces Set) 1, 3, 5, 15, 30 & 45 Degrees (01 No. each)
1, 3, 9, & 27 Minutes ( 01 No. each)
6, 12 & 30 Seconds ( 01 No. each)
Precision Square Block ( 01 No. )
* All Figures in mm
 
| Inside Dial Calipers | Gauge Blocks / Slip Gauges | Surface & Angle Plates |
| Testing Instruments | Magnetic & Nonmagnetic V Blocks | Torque Wrenches | Pistol Calipers |