|
| |
|
|
Pioneers in the field of |
Tungsten Carbide Slip Gauges and other high-quality metrology products |
| |
|
| Introduction |
| |
Slip Gauge Accessories are designed and manufactured to extend the high accuracy of slip gauges into the field of fast, accurate and temporary gauging . They fast, accurate and temporary gauging. They are used in inspection , tool room and machine shops on small batch production to keep gauging cost at a minimum. |
| |
Following are the popular examples quoted foe use |
• Internal cylindrical gauge (Instead of Limit Plug Gauge)
• External gauge (Instead of Snap Gauge or Template)
• Precision Height Gauge (Instead of Height Marking Instrument)
• Precision Marking Compass
• Setting for Bore Gauge
• For exact graduation |
| |
| |
|
 |
Slip Gauge Accessories are available in two sets 17 - pieces and 7- pieces |
|
|
| |
| |
|
Introduction |
| |
"Mikronix" introducing Angle Slip Gauges as per IS : 6231 - 1971 , designed for the inspection and calibration of angle, tapers, indexing plates, rotary scales, clinometers, dividing heads, rotary tables etc. |
| |
Materials |
| |
Angle Gauge Blocks are made from High Carbon High Chromium Steel which has the properties of aging stability in dimensions and wear resistance. The working surfaces are hardened to 800HV. Also Angle Gauge Blocks available in Tungsten Carbide. |
| |
Scope |
| |
These angle gauges together with the square block used to obtain any angle between 0 and 360 degrees in steps of 6 seconds. |
| |
| Special Features |
• Accuracy measurement of any angle
• No cumulative errors of division.
• Wringing property similar to slip gauges.
• High degree of reflectivity which enables them to be used with an autocollimator. |
|
|
|
| |
Tungsten Carbide Angle Slip Gauges |
| |
|
Set A |
| 1 No. each 1, 3, 9, 27 & 41 Degrees |
| 1 No. each 1, 3, 9 & 27 Minutes |
| 1 No. each 6, 18 & 30 Seconds |
| 1 No. Precision square block |
|
|
Set B |
| 1 No. each 1, 3, 5, 15, 30 & 45 Degrees |
| 1 No. each 1, 3, 5, 20 & 30 Minutes |
| 1 No. each 6, 12 & 30 Seconds |
| 1 No. Precision square block |
|
|
| |
Note: Any angle beyond 81° in the case of Set A and 90° in the case of Set B, can be obtained suitably using the precision square block of steel provided along with each set. The above sets along with the square block enable to be built up to 6 seconds, that is to within ±3 seconds of the required angle. |
| |
Slip Gauge Accessories are available in two sets 17 - pieces and 7- pieces
|
|
| |
| |
| |
Caliper Checker AND Micrometer Checker
|
|
|
|
| |
|
|
Used for the calibration of Venire Calipers and Height Gauges, Caliper Checker is designed to check accuracy of Main Scale at regular intervals through out the range, which meets the requirements of IS Standards. |
|
Mikronix offers micrometer checker for quick calibration of 0-25mm micrometers. These sets are available in metric & inch sizes. They are designed specially to suit calibration and inspection of micrometers.
|
The instrument is sufficiently rigid and consists of stepped slip gauges permanently fixed in inner casing .The Caliper Checker is ideal for in0house periodic calibration of measuring instruments i.e. Venire Caliper and Height Gauge.
* All figures in mm |
|
The sizes in the set are so selected that they ensure checking of micrometers at various radial positions. Thus in addition to the pitch error, errors due to drunken threads also can be located. This set is also recommended by is-2967 of 1964 for inspection of external micrometers. Micrometer Checking Set comprises of the following sizes in grades '0, ' I ' and ' II'. |
| TECHNICAL SPECIFICATIONS * |
|
|
| Range |
Height Measurement |
External Measurement |
Internal Measurement |
| 0-300 |
370 |
300 |
300 |
| 0-600 |
670 |
600 |
600 |
| 0-1000 |
1070 |
1000 |
1000 |
|
|
| Metric 10-piece Set |
| 2.5, 5.1, 7.7, 10.3, 12.9, 15.0, 17.6, 20.2,22.8 & 25.0 mm |
| Metric 8-pieces set |
| 3.1, 6.5, 9.7, 12.5, 15.8, 19.0, 21.9 & 25.0 mm |
| Imperial 8 pieces set |
| 0.130", 0.250", 0.385", 0.50", 0.615", 0.750", 0.870" & 1". |
|
|
| Caliper Checker |
|
|
|
|
|
|
| ------------------------------------------------------------------------------------------------------------ |
| |
|
| |
|
|
