PORTABLE TYPE |
MAGNO - MASTER. 1500 |
|
| MAGNO - MASTER 1500 has been specially designed for use as a portable unit. It is normally supplied for table mounting and can be lifted by handle by one man. The accessories are contained in a sturdy canvas bag. A special box type trolley with locking arrangement for accessories is available as an optional accessory. A pram type trolley for easy maneouvrability is also available. The equipment is suitable for detecting all surface and sub-surface cracks upto a depth of 6 mm in ferro - magnetic objects of any shape and size. Demagnetisation is achieved by the suitable diameter. Facility for remote control operation has been provided.
Weighing 42 kg without accessories and having output upto a max of 1000 Amp AC and half wave DC for surface and sub-surface detection upto a depth of 6 mm in ferrous components of varied types of shapes and sizes and in welds. |
|
|
|
|
MCD 25 - 7 - 5 CF 10 |
|
Stationary unit of contact and coil type in the medium range Output of 2500 Amp in 6 steps for longitudinal magnetisation. Suitable for detection of surface and near surface crecks in ferro-magnetic components upto 1000 mm long. 80 mm dia and 50 k weight. Facility for combined magnetisation by simultaneous application of circular and longitudinal fields provided. Dark room an integral part of the unit. Demagnetisation by separate demagnetiser. HWDC facility for detection of sub-surface cracks and inclusions provided optionally.
Power : 415V - 3 Ph - Hz - 60 Amp intermittent.
Various models in the range of 1000 to 6000 Amps for circular mag and upto in our 15000 Ampere turns for long mag with clamping distance from the smallest to 4.5 mtr. |
|
|
|
|
MCD 30 - 0.5 03 SP |
|
A special purpose machine designed for checking surface and near surface, subsurface cracks and inclusions in High Tension insulator caps and ball pins at the rate of around 6 jobs per minute. With an output of upto 3000 Amps for circular magnetisation and upto 7.5 KAT for longitudinal magnetisation, the machine is suitable for testing components upto 300 mm long, 120 mm dia and 10 kg weight.
The magnetisation process commencing with clamping of the job by compressed air, spraying of magnetic bath on the job, application of magnetisation shot and declamping in fully automatic. The cycle repeats itself automatically so long as the cycle ON switch remains in the ON position. In addition to sperate magnetisation in longitudinal and transverse planes, facility has been provided for simultaneous magentisation for decting cracks in all directions in one operation. A 30 litre magnetic bath tank with circulation and agitation system is provided. Inspection is done under black light. Demagnetisation is carried out on a separate coil type of demagnetiser.
Power : 415V - 3 Ph - 50 Hz - 75 Amps intermittent. Compressed air : 5 Kg per cm2
Various models both automatic and semi-automatic for checking of components like races, bearing rollers, fasteners, bars, crankshafts, con, rods etc.
|
|
|
|
|
MCD 35-05 CF- SPM |
|
A special purpose machine designed for detection of all surface and sub surface cracks. This machine is specially designed for in line crack detection. In this finished or semi finished products are kept on indexing table and automatically get magnetised one by one. After cycle start operation through PLC control. Two types of mag is provided, CIR as well as longitudal and also COMB facility and auto/manual mode is provided.
Power required: 415V Ac 3 Ph 63 Amps. Compressed air: 5Kg/cm2
|
|
|
|
|
TABLE MOUNTING TYPE |
|
The demagnetiser comprises of a coil through which AC at mains frequency is passed. The job to be demagnetised is pulled out of the coil along its longitudinal axis and kept at a distance beyond 1 mtr from the coil. Two versions of the coil DM 200 and DM 300 with round port of 200 and 300 mm respectively are in our current line of production, for safety MCB provided. The coils work of 230V AC, 50 Cycle, Single phase supply and give very satisfactory results.
Round shaped coils of 200 and 300 mm dia and square shaped coils in the range of 300 to 800 mm port wit track and carriage.
|
|
|
|
|
|
MCD - 3505CF |
|
This SPM is with Spring grip facility and used for testing surface as well as subsurface defects or cracks in bar. This machine is also available with coil type for longitudinal Magnetisation for checking circular cracks and circular Magnetisation fir lognitudinal cracks. This is provided with Spring grips where compressed air is not available.
Power supply required: 415V 3 ph50Hz Ac 63 Amps
Various models both automatic and semi-automatic for checking of bars of various diameters and lengths.
|
|
|
|
