Weatherproof Pressure Gauges, Temperature Gauges, Pressure Switches, Pressure Transducer, Pressure Transmitters, Diaphragm Seal Gauges, Mumbai, India
Home     |     About Us      |      Products      |      Contact Us      |      Enquiry
 
 
 

Pressure Gauges

PRESSURE GAUGES 

 
Mass Weatherproof bourdon type pressure gauges
Specification
Dial Size : 65mm, 100mm, 150mm & 250mm
Accuracy : + - 1% of F.S.D
Bourdon Tube : S.S. 316/Brass/Monel/Phosphor Bronze
Movement : S.S. 304/S.S. 316/Brass
Socket : S.S. 316/Brass/Monel/Phosphor Bronze
Case : S.S. 316 snap action bayonet type/Die cast Aluminium Weatherproof with screwed outer bezel, Stoved enamel black finish.
Mounting : Direct with bottom Entry/Direct with back entry/Flush Panel with back entry(Three hole panel or bracket type)/Surface with bottom entry.
Thread Connection : 1/8", 1/4", 3/8", 1/2" BSP/BSPT/NPT (M)
Window : Acrylic Glass/Glass/Toughened Glass/ Shatterproof Glass.
Joints : S.S. Bourdon tube tip and the socket ends are ARGON ARC WELDED and phosphor bronze bourdon tubes are silver brazed/soldered. Bourdon tubes are heat-treated and stress relieved.
Mass Weatherproof bourdon type pressure gauges
   
Mass Glycerine Filled Pressure Gauges
Specification
Dial Size : 63mm, 100mm & 150mm
Accuracy : + 2%/+ 1% of full scale
Bourdon : SS316/Brass/Monel/Phosphor Bronze
Movement : S.S. 304/S.S. 316/Brass
Socket : SS316/Brass/Monel/SS316L
Case & Bezel : S.S. 304 Crimp type/ Snap Action Bayonet type.
Range : Pressure upto 1400 kg/cm, Vacuum & Compound Ranges.
Joints : S.S. Bourdon tube tip and the socket ends are ARGON ARC WELDED and phosphor bronze bourdon tubes are silver brazed/soldered. Bourdon tubes are heat-treated and stress relieved.
Mass Glycerine Filled Pressure Gauges
   
Mass Electrical Contact Pressure Gauges
SPECIFICATION

Electrical Contact can be used up to 380 volts
AC/DC and switching capacity up to 30 watts/50VA.
The current rating must not exceed 1 Amp.
Function:
  The adjustable contact arms P & Q can be set from outside individually by a knob at any required set point. The limit value switch is so designed that the instrument pointer can continue its movement beyond the set pointer, after the contact has been made.
Mass Electrical Contact Pressure Gauges
   
Mass Bellow Differential Pressure Gauges
SPECIFICATION
Dial Size : 150mm
Bellows : S.S. 316L Argon arc-welded
Connections : S.S. 316L Arc-welded on the case. Both connections are parallel in vertical direction. 45 degree & Back connection can be provided on request.
Connection Size : 1/2" BSP/Extra swil adapters for manifold connection or any standard connection can be provided on request.
Case & Bezel : Stamped S.S.304, 1mm thick, snap action bayonet ring ensures the perfect sealing of the case.(Weather proof class IP-55 & 65)
Movement : All S.S. balance, welded frame, swiveling by means of flexible blades, S.S. accurate magnifying movement.
Window : Toughened Glass/Safety Glass.
Blowout : Rubber disc.
 
Mass Bellow Differential Pressure Gauges
 
   
Home | About Us | Products | Contact Us | Enquiry
Designed & Hosted by : MID    Promoted by : GID