|
About Company
Kimaya Engineers took wings in 1981, guided by the vision & foresight of its founder, Mr. Jagannath S. Gadre. An engineering graduate from University of Missouri, USA, Mr. Gadre had a wide exposure in the field of Equipment Design & Automation.
We began our product line with the development of our first hydraulic equipment which was a Manual Lab. Pellet Press used for IR/FTIR Spectroscopy Analysis. This import substitution product saved valuable foreign exchange for the country & was highly appreciated by various Indian Universities, Industries such as Food & Drugs, Chemicals & Petrochemicals, Cosmetics & Engineering, R&D Labs., Test Labs. as well as Govt. Organizations such as B.A.R.C. & I.S.R.O.
|
|
|
------------------------------------------------------------------------------------ |
|
Made To Order Lab. Equipment
|
(1) Hydraulic Pinching Tool
(2) Break Point Tester
(3) Slit Flow Tester & Angle of Repose Apparatus
(1) Hydraulic Pinching Tool
Hydraulic tube pinching tool is used to separate linac tube from vacuum pumping system. Its function is to pinch copper tube of ¾ inch dia. & wall thickness of 2.5 mm. Hydraulic Pinching Tool comprises of hand pump, 3 meter long flexible hose pipe, pressure gauge & hydraulic cylinder with pinching jaws. Capacity of Hand Pump is 10,000 PSI. Pressure Gauge is provided to know at what pressure pinching is taking place. Jaws have proper rounding such that pinching results in vacuum tight joint after pinch off. Pinching takes place at the pressure of 8,000 PSI.
(2) Break Point Tester
Break-point tester is used for checking the breaking-point pressure of ceramic components as well as those made from similar brittle materials. The Item which is to be tested for break-strength is placed in the cavity of die plate & hydraulic pressure is applied. The specially designed pressure indicator has 2 pointers, one of which shows the exact pressure applied on the ceramic balls at the time of breaking.
|
|
|
------------------------------------------------------------------------------------ |
Tungsten Carbide Dies For Powder Compaction
|
|
|
|
For certain specific applications, dies made from tungsten carbide are preferred over those made from die steel. Tungsten carbide has very high compressive strength & hence can take high pressure. Each Die consists of outer die body, punches ( envils), pusher rod & pellet removal ring. Carbide Punches (envils) with mirror finished surface produce pellets (discs) with excellent surface finish. Most commonly used sizes are :- 10 mm, 13 mm, 20 mm & 25 mm.
Carbide dies normally required by our customers are of the following types :-
(1) Complete Carbide Dies - all parts of Tungsten Carbide
(2) Die Body with inner lining of carbide & outer casing of hardened steel. Punches &
Pusher rod are made of hardened steel.
(3) Die body of hardened steel. Punches & pusher rod are made of carbide.
The dies can be subjected to a maximum load of 25 Tons, depending upon
desired pellet diameter.
Note
Tungsten Carbide being brittle in nature, is not guaranteed against breakage. Hence, it should be handled with utmost care. |
|
|
------------------------------------------------------------------------------------ |
Accessories for IR / FTIR Spectroscopy Analysis (Solid Sampling)
(1) 15 Tons Manual Lab. Press (Table-top)
(2) 13 mm Evacuable KBr Die Set
(3) 13 mm KBr Pellet Holder
(4) Agate Mortar & Pestle & Analytical Grade KBr Powder
(5) Dry Box
(6) 15 Tons Manual Lab. Press (Table-top)
Features :-
* Table-top Model
* Compact & elegant design with safety screens
* Smooth, simple & effortless operation
* Powder-coated surface finish
* Pressure Gauge calibrated in Tons & Kg/sq. cm.
with Calibration & Traceability Certificate for customer's
ISO requirements.
* Excellent quality seals provide a leak-proof system
* All contact parts hardened & hard-chrome plated
|
|
|
|
|
------------------------------------------------------------------------------------ |
Accessories for XRF Sample Preparation & Analysis
(1) 25 Tons Manual Lab Press (Table-top)
(2) 30 Tons Manual Lab Press (Column type)
(3) 40 Tons Manual Lab Press (Column type)
(4) 40 mm Die Set (for obtaining round plaques)
(5) 40 mm Die Set (for pressing samples in Aluminium Cups)
(6) 40 mm Die Set (for pressing samples in Re-usable Steel Rings)
(7) Re-usable Steel Rings
(1) 25 Tons Manual Lab. Press (Table-top)
Features :-
* Table-top Model
* Compact & sturdy design
* Side Plate Construction integral with hydraulic
cylinder
* Pump is kept on one side for easy operation
* Press mounted on a broad base for stability
* Calibrated pressure gauge & high pressure seals
* Safety mechanisms to prevent excessive ram
stroke & excessive pressure.
|
|
|
|
|
------------------------------------------------------------------------------------ |
|
Office & Works :
Digvijay Estate No.2, Pokhran Road No.1, P.O.J.K. Gram,
Upvan, Thane (W) - 400606, Maharashtra, India.
(Site is located at 15 to 20 minutes from Mumbai.)
Tel. : (022) 25853758 / 25889516
Fax : (022) 25853758 Cell : 9869004560
E-mail :
Website : www.kimayaengineers.com
Contact Persons : Mr. Mandar Gadre / Mr. Arun Kale |
|
------------------------------------------------------------------------------------ |
ENQUIRY FORM
*
Indicates Compulsory Fields
|
|
|
|