|
PRODUCTS |
|
|
|
|
|
|
|
|
'Ji' Bimetal DIAL THERMOMETERS |
|
|
Dial size |
: |
63, 100, 150 mm |
|
Case |
: |
Pressed Steel Chrome plated or SS |
|
Mounting |
: |
Back Horizontal or Bottom Vertical |
|
Bulb & Stem |
: |
2", 3", 6", 9", 12" std. upto 48" long |
|
Connection |
|
1/2" BSP (M) or as required |
|
Bulb, Stem & Connection |
|
|
|
Material |
: |
M.S.Chrome plated or SS |
|
Bulb & Stem dia |
: |
1/4", 3/8" |
|
Range |
: |
+/- 2% FSD |
|
Accuracy |
: |
-20 to 60C to upto 600C |
|
|
|
|
|
|
|
|
|
|
'Ji'
Bourdon type PRESSURE GAUGES |
|
|
|
Dial size |
: |
40, 50, 63, 100, 150, 200, 250mm |
Case |
: |
Pressed steel or stainless
Steel |
Mounting |
: |
Surface, Direct, Back or
Panel |
Range |
: |
760mm Hg to 0 vaccum, 0 to 700Kg/cm² |
|
|
Comp-760mm Hg
to 28 Kg/cm2 or Bar & |
|
|
Psi
Scales. |
Working parts |
: |
Non ferrous |
Connections |
: |
1/8", 1/4",
3/8" ,1/2" BSP, NPT, |
|
|
OR Metric Threads |
ACCURACY |
: |
+/- 2% FSD |
Note |
: |
Glycerine filled on request. Ammonia & |
|
|
Oxygen Gauges also avaliable. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
METAL TUBE ROTAMETER |
|
PRODUCT PREVIEW |
|
TECHNICAL INFORMATION |
|
|
|
|
|
|
|
|
|
Principle of measurement:
The variable area flowmeter measures the flow rate of liquids and gases in pipe lines. It contains a vertical metal tube.
with an orifice (or a conical tube which widens towards the top) through which the measured medium flows.
The float (which can move in the tube in the vertical plane) settles at a specific level, if the forces acting on it are in equilibrium, such that the weight of the float is identical to the sum of the buoyancy force and the flow force. The level of the float in the conical measuring tube is proportional to the flow rate. A magnet located in the float and a magnet follow-up system enable the float’s level in the tube to be indicated via a pointer. A cam mechanism
linearizes the flow rate. The flow rate is then read from the scale according to the pointer position. |
|
|
General Specification:
Size: ½” to 6” and DN 15 to DN 150
End Connection: Flanged to ANSI, DIN standard
Pressure rating: DN 15 to DN 50 (1/2” to 2”) - 4.0 MPa (580 psi)
DN 80 to DN150 (3” to 6”) - 1.6 MPa (232 psi)
Flow range: 2.5 - 100000 LPH (water) or 0.07 - 3000 m3/hr (air)
Process temperature rating: Normal- H1: -40 to 100 deg C
High temperature version- H2: -80 to 250 deg C
Ambient temperature limit: -25 deg C to + 55 deg C
Materials: Standard: SS 316,
Optional: SS 316 Ti or PTFE lined SS316
Range ability: For sizes up to 4” (DN100) - 10:1 For 6”: 5:1
Accuracy: Standard: +/- 2.5% Full Scale; Special: +/- 1.5% Full Scales |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
THERMOWELL |
PRODUCT PREVIEW |
|
BARSTOCK AND FABRICATED SCREW THREAD TYPE / FLANGED TYPE |
|
|
|
|
|
|
|
|
DESCRIPTION |
|
As per Drawing or our STD. |
THERMOWELL O. D |
: |
17,18, 19,20.21,22,23,24,26,28,30,32MM |
THERMOWELL |
: |
6,6.5,7,9,10,10,5,11,11.5,12,12.5,13,14, 15,16mm |
|
|
Barstock Type, Total length 75mm to 800mm only. |
|
|
Fabricated Type, Total length 75mm to 1500mm only. |
|
|
Flanges std. ASA, ANS1, BS, DIN Standard for Pressure |
|
|
rating of 150, 300, 400, 600, 900, PS1 |
MATERIALS |
: |
AISI 304, 316, 316L, 321, M.S, C.S. etc. |
|
|
BARSTOCK Thermowell with flange Std. ASA, ANSI, BS, |
|
|
DIN standard for Pressure Rating of 150, 300, 400, 600, |
|
|
900 PS.I. |
|
|
* Other Material & Techinical Specification on request |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIGITAL PRESSURE GAUGE LOW RANGE |
|
|
|
SPECIFICATION |
|
The Digi Gauge must be exercised and re-zeroed whenever exposed to significant environmental conditions to achieve these specifications. To exercise the gauge, cycle the Digi Gauge between zero and pressure of interest.
A properly exercised gauge will return to perfect zero reading. Exposure to environmental extremes of temperature, shock and / or vibration may warrant a more frequent re-certification period.
Power : 7.5V Duracell type MN2400 LR03, 5 Nos.
Connection : 1/4” BSP MALE (Other on request by adopter)
Over pressure: 125% of specified range
Temperature -
Storage : -40 0C to +70 0C
Operating : 0-60 0C
Enclosure : Aluminium Anodized, Light weight.
Display : 15 mm Heigh LCD Showing pressure, units & low batt. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ENQUIRY |
|
|
|
*
Indicates Compulsory Fields
|
|
|
|
|
|
|