Manufacturers and Suppliers Of Water Distillation Apparatus, Hot Plate, Laboratory Oven, Stability Chamber

Output 4L /hour , Heavy Duty, wall hanging type to fit with clamp, electrically operated, single walled, capable of producing pyrogen free distilled water as per IP standards. Contact parts  made of stainless steel, immersion type water heater 2 in numbers, To work on 220 v.AC. Supplied with appropriate tubing for installation of the unit.       

Wall mounting Manesty still, designed for continuous automatic and efficient production of high quality distilled water at minimum cost.

The raw water enters at the lower end of the condenser pipe, circulating around the condenser tube and ultimately filling the boiling chamber to a height predetermined by means of a weir. The descending steam in the condenser tube thus preheats the ascending column of raw water, which is economical, and also tends to expel gases dissolved in it. The still is so designed that these expelled gases can be vented to the atmosphere. The steam generated in the boiling chamber passes through a system of baffles on its way to the condenser tube. The baffles are so arranged that the vapour changes direction three times before passing into the condenser tube. In this way the entrainment of raw water, a main cause of chemical or organic degradation in distilled water, is prevented. If operated correctly, pyrogen-free water is obtained. The boiling chamber, condenser pipe and tube, weir assembly, inner baffles, outer lid and inner baffle cup are made of stainless steel.

In laboratory settings, Hot plates are generally used to heat glassware or its contents. Some hot plates also contain a magnetic stirrer, allowing the heated liquid to be stirred automatically.

HOT PLATE RECTANGULAR    Accumax  AI- 119
Mild steel construction powder coated,  Cast iron Top, heating elements are of kanthal wire beaded in ceramic material fitted with energy regulator, on off switch indicating lamps, temperature range 50-300 deg.c. Work on 220 V AC

Sizes : 250 x 300 mm
             250 x 400 mm
             300 x 450 mm
             450 x 600 mm
             600 x 900 mm

Optional :

Digitally temperature controlled PID type with PT-100 sensor.
Stainless Steel lining at cast iron top of hot plate, Work on 220 V AC

Double / Semi Triple / Triple walled, outside mild steel construction, inside chamber made of stainless steel of 304 grade, perforated adjustable shelves, air ventilation, temperature range 50-300 deg.c. / 50- 400 deg.c. digitally controlled with PT 100 Sensor, +/- 3 deg.c., heating elements tubular type, with air circulating fan with ¼ HP motor of standard make,  ceramic  fiber wool  insulation 100mm /125mm door with heavy duty asbestos gasket, handle, on / off switch, indicating lamps, Work on 220/440 v AC.    

Accumax Double walled outer construction of mild steel powder coated paint, inner chamber of highly polished stainless steel sheet, inner chamber has door operated illumination,  compartment with stainless steel removable and adjustable shelves, forced air circulation is equipped with best quality motor blower with air ducting system for positive air flow for constant room temperature in the chamber. Puff insulation is given between the inner and outer walls to prevent thermal loss. Equipment is fitted with hermetically sealed compressor, filled with eco-friendly CFC Free refrigerant. It is provided with 2 doors with inner full length transparent door. Main door is double walled puff insulated inner stainless steel and fitted with heavy sturdy hinge and magnetic gasket, lock & key. Automatic temperature control by Digital temperature controller cum indicator with Pt.100 sensor. The equipment has wheels for easy mobility. Temperature range is -25 deg.c. + 70 deg.c. +/- 1 deg.c. To work on 220 V.AC supply.

Accumax Double walled outer construction of mild steel powder coated paint, inner chamber of highly polished stainless steel sheet, inner, compartment with stainless steel removable and adjustable shelves. Forced air circulation is equipped with best quality motor blower with air ducting system for positive air flow for constant temperature in the chamber. Puff insulation is given between the inner and outer walls to prevent thermal loss. Equipment is fitted with hermetically sealed compressor with, filled with eco-friendly CFC Free refrigerant. It is provided with 2 doors with inner full length transparent door. Main door is double walled puff insulated and fitted with heavy sturdy hinge and magnetic gasket,  lock & key. Automatic temperature control by Digital temperature controller cum indicator PID with Pt. 100 sensor. The equipment has wheels for easy mobility. Temperature range is 5 deg.c. to 50 deg.c.+/- 1 deg.c,  Automatic humidity controller cum indicator, with Imported humidity sensor, humidity 55%-95%  ± 5%.To work on 220 V.AC supply.