PRODUCTS |
|
Size of Silicone Transparent Tube |
| Sl # |
ID (mm) |
OD (mm) |
Sl # |
ID (mm) |
OD (mm) |
1 |
0.8 |
2.4 |
30 |
8.0 |
14.0 |
2 |
1.0 |
2.0 |
31 |
8.0 |
16.0 |
3 |
1.0 |
3.0 |
32 |
9.0 |
13.0 |
4 |
1.5 |
2.5 |
33 |
9.0 |
15.0 |
5 |
1.5 |
3.5 |
34 |
9.0 |
20.0 |
6 |
2.0 |
4.0 |
35 |
10.0 |
12.0 |
7 |
2.0 |
6.0 |
36 |
10.0 |
14.0 |
8 |
3.0 |
5.0 |
37 |
10.0 |
15.0 |
9 |
3.0 |
6.0 |
38 |
10.0 |
16.0 |
10 |
3.0 |
7.0 |
39 |
11.0 |
16.0 |
11 |
4.0 |
6.0 |
40 |
12.0 |
16.0 |
12 |
4.0 |
7.0 |
41 |
12.0 |
17.0 |
13 |
4.0 |
8.0 |
42 |
12.0 |
18.0 |
14 |
4.0 |
9.0 |
43 |
12.0 |
19.0 |
15 |
4.0 |
10.0 |
44 |
13.5 |
19.5 |
16 |
5.0 |
7.0 |
45 |
15.0 |
20.0 |
17 |
5.0 |
8.0 |
46 |
15.0 |
21.0 |
18 |
5.0 |
9.0 |
47 |
16.0 |
22.0 |
19 |
5.0 |
10.0 |
48 |
19.0 |
29.0 |
20 |
5.0 |
11.0 |
49 |
19.5 |
25.5 |
21 |
6.0 |
9.0 |
50 |
19.5 |
31.5 |
22 |
6.0 |
10.0 |
51 |
24.0 |
30.0 |
23 |
6.0 |
11.0 |
52 |
25.0 |
31.0 |
24 |
6.0 |
12.0 |
53 |
25.0 |
35.0 |
25 |
7.0 |
10.0 |
54 |
30.0 |
40.0 |
26 |
7.0 |
11.0 |
55 |
40.0 |
50.0 |
27 |
7.0 |
13.0 |
56 |
50.0 |
56.0 |
28 |
8.0 |
11.0 |
57 |
50.0 |
60.0 |
29 |
8.0 |
12.0 |
58 |
60.0 |
70.0 |
|
|
|
TYPE OF EXPANSION JOINTS
STANDARD - Single arch for use where initial misalignment of two pipes to be connected does not exceed 1.8", but not where flanges are out of parallel. Available for pressure or vacuum. Arch can be filled, however,
movement limitations are reduced 50% |
MULTIPLE ARCH - Standard joint with
2 or 3 arches. Recommended for
greater movement where face to face
dimensions are not limited. Suitable for
pressure or vacuum applications with
flanges or sleeve ends. |
LIGHT WEIGHT - Recommended for handling air, liquid, gases and fumes at 7.5 ( 15"vacuum absolute ) to
15 psi. Available with multiple arches, filled arches and sleeves ends. |
RETAINING RINGS -
Use of split-steel rings assure a pressure-tight seal. Outside diameter is same as standard flange and contains the same number of bolt holes. Those used on joint sizes upto 40" are two-piece ( 4 segments per joint ). Four-piece rings ( 8 segments per joint ) are used on all larger sizes. All are generally 3.8" thick.
|
|
|
|
SHEETS
RUBBER SHEETS & RUBBER COATED FABRICS.
[1] RUBBER SHEETS In SILICONE, VITON, NEOPRENE, NITRILE, EPDM.
Size range width =1200 mm, Thick = 1 mm To over 25 mm,
Length= In running length
Hardness = 60 to 80 shore ‘A’.
Sponge Sheet in SILICONE, NEOPRENE, NITRILE, EPDM in various Sizes
[2] Rubber coated Fabrics in all type of Rubber
Size range: 1200 mm or more, Thick= 0.3 mm To over 5 mm.
[3] FABRIC: CANVAS, NYLON, POLYESTER, ARAMID, GLASS FIBRE etc.
[4] COLOUR: SINGLE or DOUBLE COLOUR |
|
|
| * O RINGS * ( in RUBBER & PTFE) |
Viz: VITON, SILICONE, NEOPRENE, BUTYL, NITRILE, EPDM, HYPALON, POLYACRILIC NATURAL, POLYURETHANE, TEFLON.
AS PER IS, BS, ASTM, GERMAN, SWEDISH, FRENCH, ITALY, JAPAN, IMPERIAL STANDARDS, METRIC & INCHES ‘O’ RINGS.
SPECIAL ENDLESS ‘O’ RING & GASKET MORE THAN 1 MTR. ID OFFERED IN ROUND,SGUARE AND RECTANGULAR SECTIONS. |
|
|
PTFE is fluoropolymer possessing a unique combination of frictional, chemical, thermal, andelectrical properties. It has non-stick nature, non wetting and is self-lubricating. It has outstanding chemicals resistance and is unaffected by all known chemicals except alkali metals, fluorine under certain conditions. It has excellent weather resistance . PTFE has the widest working temperature range, the best of the solid dielectrics an excellent insulator.
Some of PTFE applications are O-rings, gaskets, pumps impeller, valve seals, bushes, V-rings, Expansion bellows, sleeves in heat exchanger equipments, piston rings, metal molded with PTFE, valve holder, barb insulator, hydraulic seals, Diaphragm,Bearing plates, piston Rings , Pipe & Tubings etc. |
Also available products of filled grades in
1. Graphite filled PTFE
2. Glass filled PTFE
3. Bronze filled PTFE
4. MOS2 filled PTFE |
|
| |
|
