Distribution Boards

Distribution Boards

Low Voltage Switch Board

Low Voltage Switch Board

HOME | PRODUCTS | PROFILE | CONTACT | ENQUIRY|
   
Low Voltage Switch Board
Motor Control Centre
Automation
Distribution Boards
Capacitor Panels
Testing & Measuring Instruments
CG Drive- SK
CG Drive- SG
COMPANY PROFILE
Design & Manufacturer of PLC Control Panels, Control Systems, Automation Control Panels, AC Drives panel, MCC Panels, Flame Proof Panels, Mumbai, India

We are pleased to introduce ourselves as a designers and manufacturers of CONTROL SYSTEMS for industrial machineries and Industrial Plants.

We build custom control panels, motor control panels, and instrument control panels to your specifications using only the highest quality standards. Our high standards and strict quality control mean years of maintenance free operation for your panel application. Every panel is fully tested and documented before it leaves our shop.
Whether you have an existing panel causing you problems or you need a new control panel, Industrial Electrical Company's world class capabilities can satisfy and exceed all your control panel requirements. We perform all design and engineering tasks for all hardware and software subsystems. Complete submittals, detailed installation drawings and "as built" documentation is included with every project.

PRODUCTS

Low Voltage Switchboards

Low Voltage Switchboards GRUPS Custom-built Low Voltage Switchboard is available in a range from 100A to 2100A with Short-circuit Withstand Protection up to 100kA. It is also available in different forms, suiting a customer's need and application. Its state-of-the-art, fully tested design ensures safety, power-saving and simplicity.

1 The switchboard is type tested up to 2000Amps, 75kA at 415V,
2 The switchboard is a free standing design that is both available either
for indoor or outdoor application; the degree of protection is upto IP54
3 It can be front or rear accessible and can be bottom or top cable entry.
Removable gland plate is provided for the cable entry. Aluminum gland
plate can be provided upon request for easier installation of cable gland
and to provide corrosion resistance even after punching at the site.
4 Busbars are of tin-plated copper. Silver plated copper and Busbars with PVC sleeves can also be provided upon request.
  TOP

Motor Control Center / MCC Panel

Motor Control Center The Motor Control Center is a compartmental type with internal separation


1 The Motor Control Center is type tested.
2 The Motor Control Center is a free standing design that is available only for indoor application; the degree of protection
3 The Motor Control Center is subdivided in three functional compartments. The Busbar compartment, where the main horizontal and vertical busbar are located. The Equipment compartment, And the Cable compartment, where the termination is located which is design for fast and comfortable cabling.
4 The modules are of draw-out or fixed versions. The maximum rating for draw-out version is up to 225A. For higher rating of motors, fixed version will be used.

  TOP

Automation (PLC & VFD Panels)

Automation The Automation Department of Grups Electrical specializes in projects pertaining to control automation systems. It consists of a team of wellqualified engineers who expertise in the automation fields such as PLC, variable speed drives, computer controlled systems, etc.

1 Provide solution for any automatic sequencing required by a client
2 Provide Optimum Control Design with control diagram
3 Translate it into hardware using either Conventional Logic Control Component, Programmable Logic Controller (PLC), Variable Speed Drives (VSD) (AC / DC)
4 Build turnkey Control Panel in our Panel Builder factory
  TOP

Distribution Boards up to 400Amps

The GRUPS Custom-built Distribution Board (MB Type) is available in a range from 100A to 400A. Its modular design provides complete flexibility to the customers at the time of installation. It serves as a complete solution for the distribution of power.

1 The distribution board is a wall mounted design that is both available either for indoor or outdoor application.
2 It is a group mounted type with the selection of internal separation.
3 Enclosure is made of 1.6mm thick electro-galvanized steel sheet with a high quality polyester powder coated finish with a variety of selection for the paint shade such as RAL 7035, RAL 7032, RAL 7033 and ANSI 61. Other shades can be provided upon request.
4 Good front accessibility for cabling that can be bottom or top entry and with a removable cable gland plate. Aluminum gland plate can be provided upon request for easier installation of cable gland and to provide corrosion resistance even after punching at the site.
  TOP

Capacitor Panels
1 The capacitor bank is a free standing design that is both available either for indoor or outdoor application.
2 The automatic power factor controller identifies the output of the capacitor stages installed and connects or disconnects them in the optimum manner as required by the actual mains condition.
3 Power capacitor is complete with discharge modules that can discharge the capacitor at less than 50V in 60 seconds.
4 Each step as a complete module is comprises of shock coils reactance, fuses, contactor, and capacitor with discharge module.
TOP

Testing & Measuring Instruments
Electrical Testing & Measurements
       
1. Primary Injection Kit for relay Testing Powder Coating Testing Equipment
2. Insulation tester ( Megger ) unto 500v – 1 no 1. Magnetic Powder thickness Meter
3. Insulation tester ( Megger ) upto 1Kv – 1 no 2. Impact Test
4. Insulation tester ( Megger ) upto 5Kv – 1 no 3. Scratch tester
5. HV tester    
6. D.C. Power Pack for Scope Testing machine    
7. Make Break Testing Kit    
8. Endurance test Kit    
9. Digital Multimeter    
10. Tong Tester    
       

TOP


CG Drive-SK

CG Drive-SK
Features of CG Drive - SK
Operation Specifications
Control method selection Open loop vector control with true space vector modulation
Output frequency range 0 to 1500Hz
Frequency Resolution Analog input Analog I/P resolution is 10Bits i.e.(0.1V/0.2mA)
  Digital input 0.001Hz
Analog Setting Method 0-10V, 2-20mA, 4-20V to +10VSM-i/o Lite option
V/Hz Characteristics Dynamic V/Hz, Quadratic V/Hz (fan/pump optimization)
Starting Characteristics 150% of FLT
Torque boost Voltage boost can be set as 0-50% of motor rated voltage


CG Drive-SG
CG Drive-SG
Features of CG Drive - SG
Operation Specifications
Control method selection Sensorless vector Control (Also capable of operating as a closed-loop control system through optional encoder feedback)
Output frequency range 0 to 500Hz (upto 37kw)
Frequency Resolution Analog input Analog I/P resolution is 10bits i.e. (0.1V/0.2ma)
  Digital input Resolution of reference via interface is 0.01Hz
Analog Setting Method Accepts and follow a selectable external speed reference from any of the following input types: analog (0-10 VDC, -10 to +10 VDC.0-20 mA or 4-20 Ma), speed potentionmeter, drive mounted keypad, serial communications, from an encoder, or from optional/communications interface options
V/Hz Characteristics Programmable & predefined V/f curves
Starting Characteristics 150% of FLT
Torque boost 0-100% In Case of Manual boost, Autoboost also available
Website : www.grupsautomation.com

Low Voltage Switch Board | Motor Control Centre | Automation | Distribution Boards | Capacitor Panels | Testing & Measuring Instruments | CG Drives SK | CG Drives SG

HOME | PRODUCTS | PROFILE | CONTACT | ENQUIRY|
Designed & Hosted by : MID  Promoted by : GID